.svg)
AI Structural Design for Single-Family Homes
Single-family homes look simple, but the structural work behind them is repetitive and deadline-driven: gravity load paths from roof to foundation, lateral bracing for wind and seismic, and calculation packages a plan checker will accept. Genia reads your architectural drawings and generates a physics-validated structural design — framing layout, member sizes, and calculation sheets — so you move from drawing to permit set in a fraction of the usual time.
Key structural considerations for single-family homes
Gravity load path
Roof and floor loads have to resolve cleanly through joists, beams, headers, posts, and down to the footings without oversized or missed members.
Lateral system
Wind and seismic demand shear walls or braced lines with a continuous load path and hold-downs sized to the uplift and overturning forces.
Openings and headers
Large windows and open-concept spans need headers and point loads carried down to bearing — a common source of RFIs when missed.
Permit-ready calcs
Reviewers expect calculations tied to the governing code (IBC / IRC and ASCE 7) with clear assumptions and load combinations.
How Genia designs single-family homes
- 1Upload the architectural drawings (PDF or Revit).
- 2Genia parses walls, openings, spans, and levels into a structural model.
- 3It generates multiple design options with member sizes checked against building codes.
- 4Export the framing plan and a permit-ready calculation sheet.
Frequently asked questions
Does Genia produce permit-ready calculations for houses?
Yes. Genia outputs calculation sheets tied to the governing code and load combinations, formatted for plan-check submittal.
Which codes does it check against?
Designs are validated against the applicable building code and ASCE 7 load provisions for gravity, wind, and seismic.
Can a licensed engineer review and stamp the output?
Yes. Genia is built to work with licensed structural engineers, who review, adjust, and seal the design.
Design single-family homes 5x faster
Turn your drawings into a physics-validated structural design with permit-ready calculations.
Get started