.svg)
AI Structural Design for Light Commercial Buildings
Light commercial buildings — retail, small offices, and mixed-use — mix longer spans, larger openings, and heavier occupancy loads than residential work. Genia turns the architectural drawings into a validated structural design with the framing and calculations needed to move a tenant-improvement or ground-up project through permitting.
Key structural considerations for light commercial
Longer spans
Open retail and office floors drive beam and joist design and deflection control.
Storefront openings
Large glazed openings concentrate loads on headers and columns with limited lateral wall length.
Occupancy loads
Commercial live loads and equipment loads change member sizing versus residential.
Mixed use
Residential-over-retail stacks different systems that must transfer cleanly.
How Genia designs light commercial
- 1Upload the commercial or mixed-use drawings.
- 2Genia parses spans, openings, and occupancy into a model.
- 3It generates code-checked framing and lateral designs.
- 4Export framing plans and calculation sheets.
Frequently asked questions
Does Genia handle mixed-use (residential over retail)?
Yes. It carries loads through the transfer between the upper residential and lower commercial systems.
Can it size for commercial live loads?
Yes. Designs use the applicable occupancy and equipment loads from the governing code.
Design light commercial 5x faster
Turn your drawings into a physics-validated structural design with permit-ready calculations.
Get started